CNC program
A CNC program is a set of coded instructions, often G-code, that tells a computer-controlled machine the tool path, speeds, feeds and tool changes for a part.
What it means
The program is written by a programmer or generated by CAM software from the part drawing, then loaded on the machine. It is specific to a machine, controller, fixture and tooling. Edits made at the machine, if not saved back, leave the next operator running the old version.
Example
A shop makes 500 flanges a month on a vertical machining centre. The programmer revises the drilling sequence to save 40 seconds a piece. The old program stays on the machine's memory card, and a night shift operator runs it, producing 60 pieces at the old cycle time.
Records and checks
- Record the program number, revision, part drawing revision, machine, tooling list and who approved it.
- Verify that the program on the machine matches the approved revision before the first piece is cut.
- The programmer controls the master copy, and the supervisor confirms the revision at each setup.
Common mistakes
- Editing a program at the machine and never saving the change back to the master.
- Keeping programs on personal pen drives with no backup or revision tracking.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →