lamp.
ResourcesPricingAbout

Power factor

Power factor is the ratio of real power in kW to apparent power in kVA, showing how effectively a site turns supplied current into useful work.

What it means

Motors, transformers and welding sets need extra current just to build magnetic fields, and this part does no work. A power factor of 1 means no such waste; 0.8 means that 20 percent of the capacity is occupied by non working current. Utilities may charge a penalty or give an incentive depending on the tariff. Capacitor banks are commonly fitted to raise it.

Example

A rolling unit in Raipur draws 160 kW at 200 kVA, so power factor is 160 divided by 200, which is 0.8. After fitting a capacitor bank, the same 160 kW needs only 168 kVA, a power factor of about 0.95.

Records and checks

  • Record monthly average power factor from the bill and the meter at different loads.
  • Verify capacitor banks are working by checking fuses, current and output regularly.
  • The electrical head reviews bills for power factor charges and the owner approves upgrades.

Common mistakes

  • Fitting a capacitor bank and never checking it, so a failed unit goes unnoticed.
  • Overcorrecting, which can cause its own problems on the supply.

Check the current rule on the official portal or with your CA before acting.

Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →