lamp.
ResourcesPricingAbout

Bend allowance

Bend allowance is the arc length of the neutral axis through a bend, added to the straight flange lengths to find the flat blank length needed for a bent part.

What it means

When sheet metal is bent, the outer surface stretches and the inner surface compresses. A line inside the thickness, the neutral axis, keeps its length. It depends on the angle, inside radius, thickness and a K-factor set by material and tooling.

Example

A 2 mm mild steel channel has an inside radius of 2 mm and a 90 degree bend, with a K-factor of 0.4. The bend allowance works out to about 4.4 mm. A designer adds that to the two flat lengths to get the blank size before cutting on the laser.

Records and checks

  • Record the material, thickness, bend angle, inside radius, tool used and K-factor value used for the part.
  • Verify with a trial bend before cutting the full batch.
  • The fabrication engineer approves the value, and the press brake operator reports any difference found at trial.

Common mistakes

  • Using a textbook K-factor without checking it on your own press brake and tooling.
  • Mixing up bend allowance with bend deduction when entering values in the cutting program.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →