Laser cutting
Laser cutting is a thermal process that melts or vaporises metal along a programmed path using a focused laser beam, giving narrow cuts and clean edges on sheet and thin plate.
What it means
The cutting head follows a file drawn from the part drawing, while an assist gas such as oxygen or nitrogen clears the molten metal. Nitrogen gives a clean edge on stainless steel. Thick plate is usually cut by plasma for cost.
Example
A fabricator sends a drawing for 400 brackets in 3 mm mild steel to a job-work laser shop. The shop nests them on a 2500 x 1250 mm sheet, charges per cutting minute plus material, and returns burr-free parts ready for bending.
Records and checks
- Record the material grade, thickness, assist gas, nesting file, sheet used and cutting time.
- Verify the first part's dimensions and hole sizes against the drawing before the full run.
- The programmer checks the file, and the incoming inspector checks the delivered lot.
Common mistakes
- Sending a drawing without stating material grade, so the shop assumes a different one and the edge quality or price changes.
- Ignoring edge hardening on oxygen cuts when the part will be tapped or welded.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →