lamp.
ResourcesPricingAbout

Root cause of breakdown

The root cause of a breakdown is the underlying reason the failure happened, which, if corrected, would prevent the same failure from recurring.

What it means

The visible failure is often a symptom. A burnt motor may be the symptom, while the cause is a blocked ventilation grille, overloading or a poor power supply. A simple way to dig is to ask "why" repeatedly until reaching something that can be fixed in the process, such as a missing cleaning step. Fixing only the symptom brings the breakdown back a few weeks later.

Example

A conveyor belt snaps three times in a year. Each replacement costs ₹5,000. Investigation finds the take-up roller is misaligned, so the belt rubs one edge. Aligning it ends the failures.

Records and checks

  • Record the failure, the whys asked, the root cause found and the corrective action and its date.
  • Verify afterwards that the fault has not recurred over a reasonable period.
  • The supervisor leads the analysis with the operator and technician; the maintenance head reviews major cases.

Common mistakes

  • Blaming the operator at the first why, without checking the equipment and procedure.
  • Recording the part replaced as the cause.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →