Cp
Cp is a capability index equal to the tolerance width divided by six standard deviations of the process, showing whether the process spread fits the tolerance.
What it means
It answers a narrow question: if the process were perfectly centred, would its natural variation fit inside the specification limits? A Cp of 1.0 means the spread just equals the tolerance, and higher is better. Because it ignores where the average sits, a process can show a good Cp and still produce bad parts if it drifts off target.
Example
A bore must be 40.00 mm plus or minus 0.05, a tolerance width of 0.10. Measured over 50 pieces, the standard deviation is 0.012 mm, so six sigma is 0.072. Cp is 0.10 divided by 0.072, about 1.39.
Records and checks
- Record the specification limits, the sample size, the measurement method and the standard deviation.
- Verify that the process was stable, with no trends or shifts, when the data was collected.
- The quality engineer calculates it, and the production head reviews it with the customer if needed.
Common mistakes
- Quoting Cp alone and ignoring the mean, which can sit near a limit.
- Calculating it from too few pieces or from one operator's best hour.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →