lamp.
ResourcesPricingAbout

Regrind ratio

Regrind ratio is the proportion of reground plastic in a mix with virgin resin, given as a percentage of the total material by weight.

What it means

A higher ratio saves money but can reduce strength, change colour and make the process less stable. A lower ratio is safer but wastes recoverable material. The right ratio depends on the product, the resin and the buyer. A food container or a safety part may allow little or none, while a bucket or crate may take a large share. Customers often specify the maximum.

Example

A crate maker blends 30 kg of regrind with 70 kg of virgin polypropylene, which is a 30 percent ratio. The buyer's specification allows up to 25 percent for its cartons. The quality head cuts the ratio to 25 percent after a drop test shows that the 30 percent crates crack at the handles.

Records and checks

  • Record the weights of virgin and regrind in each batch, the ratio calculated and the product it was used for.
  • Verify the ratio against the customer's limit, and weigh both materials rather than measuring by volume.
  • The operator weighs and mixes, the quality inspector checks the product, and the production head approves any ratio above the standard.

Common mistakes

  • Using one ratio for every product without checking the customer limit.
  • Measuring by scoop, so the real ratio is unknown.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →