lamp.
ResourcesPricingAbout

Shot weight

Shot weight is the total weight of plastic injected in one moulding cycle, adding up all the parts and the runner system.

What it means

A shot is everything the machine injects in a cycle. Weighing it shows whether the process is steady, since a change in weight means a change in fill or packing. It also feeds the material plan: shots per hour times shot weight gives the kilograms used. The shot weight must also lie within the machine's rated capacity, and a machine that is much too large for the shot may degrade the material in the barrel.

Example

A 2-cavity mould makes two 45 g crates handles with a 10 g runner, so the shot weight is 100 g. At 180 shots an hour, the machine uses 18 kg of resin an hour. Over a 20-hour day that makes 360 kg, which the store uses to plan the daily issue.

Records and checks

  • Record the shot weight at set intervals, with the part weights, the runner weight and the time of each sample.
  • Verify that the shot weight stays within the control limits and that it is within the machine's capacity.
  • The operator weighs the shot, the quality inspector reviews the sheet, and the planner uses the weight to forecast material.

Common mistakes

  • Treating shot weight and part weight as the same number.
  • Selecting a machine much larger than needed, so plastic sits too long in the barrel.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →