lamp.
ResourcesPricingAbout

Machine setup sheet

A machine setup sheet is a one-page record of the tools, fixtures, work offsets, speeds, feeds and checks needed to set up a machine for a specific part.

What it means

It captures what the best setter on the floor knows, so anyone can repeat the setup without guessing. A good sheet names the program number and revision, the tool list with holder numbers, the clamping method, the datum, offset values and the first-piece checks.

Example

A machine shop sets up a pump housing on a machining centre. The sheet says use fixture F-12, tool 4 is a 10 mm drill, the datum is the left-front corner, and measure bore diameter on the first piece. A new operator finishes setup in 40 minutes.

Records and checks

  • Record the part number, drawing and program revisions, tool list, fixture number, offsets and inspection points.
  • Verify that the sheet matches what is actually on the machine at each setup.
  • The programmer or process engineer owns the sheet, and the supervisor signs after the first-piece approval.

Common mistakes

  • Writing the sheet once and never updating it after tools or programs change.
  • Keeping it only in the programmer's head or phone so the night shift cannot find it.
Did not find your answer?Message the lamp team on WhatsApp. Ask about setup, your records, or anything we have not covered here.Ask us on WhatsApp →